Thermador Range Burner Keeps Clicking? Here’s What to Do

Is your Thermador range burner keeps clicking nonstop, even when it’s already lit? It can be a frustrating experience when you’re trying to cook, and the constant clicking sound interrupts your focus. This issue usually occurs when the igniter keeps attempting to light the burner. Fortunately, there are several reasons this might happen to your Thermador range, and most of them are easy to fix.

In this article, we’ll explore the common causes of a Thermador range burner that keeps clicking and walking you through the steps to troubleshoot and resolve the problem. Whether it’s an issue with the igniter, the burner itself, or something else entirely, we’ll help you understand what’s going wrong and how to fix it.

Common Causes of a Thermador Range Burner Keeps Clicking

Before diving into the solutions, it’s helpful to know why your burner might be clicking repeatedly. Here are some common causes:

1. Wet or Damp Burner Area: One of the most common reasons your Thermador range burner keeps clicking is moisture. If water or food debris has spilled onto the burner, it can cause the igniter to malfunction. The igniter senses the moisture and continues to attempt to light the burner.
2. Dirty Burner Ports: Over time, food particles, grease, or other debris can clog the burner ports. If the ports are blocked, the gas may not flow evenly, causing the igniter to click without igniting the gas.
3. Faulty Igniter: A malfunctioning or worn-out igniter can also cause the clicking sound. If the igniter is damaged or worn down, it may continue to spark even though the burner is already lit.
4. Improper Burner Alignment: Sometimes, the burner may not be seated correctly in its slot. If the burner is not properly aligned, the igniter may not make contact with the gas flow, leading to continuous clicking.
5. Electrical Issues: Electrical problems in the igniter system, such as a short circuit or damaged wiring, could also cause the igniter to malfunction, resulting in persistent clicking sounds.

How to Fix a Thermador Range Burner That Keeps Clicking

Now that we’ve covered some of the most common causes of this issue, let’s walk through how to fix it. Follow these simple steps to get your Thermador range burner keeps clicking problems under control.

Check for Moisture

• Start by inspecting the burner area for any moisture. If the burner area is wet, gently wipe it down with a clean towel and allow it to dry completely before attempting to use the burner again. If you’ve recently cleaned your stove, make sure the burner is dry before turning it back on.

Clean the Burner Ports

Over time, dirt and food particles can clog the burner ports, preventing the igniter from working properly. Here’s how to clean them:

• Remove the burner cap and gently lift the burner off the stovetop.
• Use a small brush or a toothpick to carefully clean any debris from the burner ports.
• Wipe the area around the burner with a damp cloth to ensure there’s no leftover grease or food particles.
• Replace the burner cap and check if the clicking stops.

Inspect the Igniter

If the burner continues to click, the issue may lie with the igniter. To check if the igniter is working properly, you’ll need to:

• Turn off the gas supply to the burner and unplug the range.
• Remove the burner cap and inspect the igniter for any visible signs of damage or wear.
• If the igniter appears cracked, corroded, or excessively worn, you may need to replace it.

Note: Replacing a faulty igniter might require professional assistance, so it’s a good idea to reach out to a technician if you’re unsure how to proceed.

Check the Burner Alignment

• Make sure the burner is seated correctly on its base. Sometimes, burners can become misaligned, which prevents the igniter from properly sparking. Align the burner carefully and check if this resolves the clicking issue.

Examine the Electrical Connections

• If none of the above steps solve the problem, the issue may be electrical. Check the wiring connected to the igniter and make sure it is secure. If you notice any frayed wires or loose connections, it’s best to contact a professional technician to inspect and repair the electrical components.

Last Words

Dealing with a Thermador range burner keeps clicking can be an annoying experience, but with the right steps, most issues are easy to resolve. Whether it’s simply cleaning the burner, checking for moisture, or replacing a faulty igniter, these solutions will help restore your burner to full working condition.

If you’ve tried all of these steps and the problem persists, or if you’re unsure about performing repairs yourself, don’t hesitate to call in the experts. Our team at Thermador Appliance Repair Experts is here to help you with any range or stove issue. Contact us today to schedule a professional repair.

FAQs

Why does my Thermador burner keep clicking?

The most common reason is moisture or food debris on the burner. It could also be due to a dirty burner port, a faulty igniter, or improper alignment.

Can I fix my Thermador range igniter myself?

If you’re comfortable working with appliances, you can inspect and clean the igniter yourself. However, if it needs replacing, it’s often best to call a professional.

How do I clean my Thermador range burner?

Remove the burner cap and use a small brush or toothpick to clean the burner ports. Wipe the area with a damp cloth to remove any debris or grease.

When should I call a professional for my Thermador range?

If you’ve tried cleaning the burner and inspecting the igniter, but the clicking continues, or if there are electrical issues, it’s time to call a professional.

Don’t miss our blog post about the Thermador range burner won’t ignite – read it now!